There are a large variety of knots for the outdoors including hunting, fishing or boating and each knot has specific properties and suitability for a range of tasks. Some knots are well-adapted to attach to particular objects such as another rope, cleat, ring, or stake. Other knots are made to bind or constrict around an object. Choosing the correct knot for the job at hand is one of the most fundamental aspects of using knots well. 

The Backcountry Outdoor News reports the latest hunting and, fishing news along with fishing derbies and tournaments

©  2010 Backcountry Press Outdoor News - All Rights Reserved                                                                                                                                           Website Design by: 

Connect With Us

Tips For Tying Knots Of Any Kind
Learn how to type all types of knots for fishing, hunting & boating. The Arbor Knot below is the FIRST knot to learn for fishing. It's used to tie new line to the reel. The Bowline is a very versatile knot used for both marine boating & hunting. It is the ultimate knot for joining together ropes, lines, and straps of different diameters. . 

  • Practice. For fishing: Take a length of fishing line, a hook with the point cut off or buried into a cork, and practice. Practice until you can tie each knot correctly. For hunting or boating take a length of rope and use a chair or tree.

  • For fishing: Always wet your knots with saliva as you pull them tight. This prevents damage to the line and allows the knot to pull tight.

  • Trim knots closely with a nail clipper. A good knot, pulled tight, will not come loose. Close trimming prevents the knot from catching snags or weeds. Do not burn the tag end—heat damages the line and knot.

  • When you're learning knots, the "tag end" (sometimes called the "working end") is the end of the line used to tie the knot. The "standing end" is that part of the line coming from your fishing reel.

  • Line is cheap. Always leave a foot or more of the tag end for tying knots so that you can tie them properly.

  • Pull up all ends when tightening the knot. With some knots this will be only the standing end and tag end; with other knots it might be three or four ends.

  • Once you find a rig that's working (a combination of weights, hooks, swivels or floats used for a particular type of fishing) don't lose it. 

  • Replace the line and retie your rigs at least every year.
Your First Knot to Know:
The Arbor Knot 
The Arbor Knot is used to tie new line to the reel. It's the first knot you need to learn. It doesn't have to be that strong. And it's easy to learn. That makes it a pretty good knot to start off with. 

Run the line around the spool hub (arbor), then take the tag end around the standing part of the line and tie an ordinary, everyday, overhand knot. Tie a second overhand knot in the tag end as close as possible to the first one. Pull on the standing part of the line and jam the two knots together against the spool of your reel.
Arbor KnotBimini Twist HuntingLure & Rig KnotsLine Joining KnotsLoop KnotsMarinePalomar Knot